English
French
HX160-260 copper busbar leveling machine busbar bending machineMain Features:bus
The LTMC HX160-260 is a roller-type copper and aluminium busbar leveling machine that uses curvature-compensation technology to remove bow and twist from bars up to 260 mm wide by 12 mm thick, built for Canadian switchgear and busway shops that need straight stock before punching or bending. It offers two frame sizes — 160 x 12 mm and 260 x 12 mm — with a 3 kW or 5.5 kW motor, and the source states it improves workpiece slip versus traditional roller levelers while cutting energy use and extending service life. The compact 1.3 m-tall footprint sits beside a 3-in-1 or punching line, and it runs on 600 V / 60 Hz Canadian shop power through a matched control panel.
HX160-260 — Motor power: 3 kW / 5.5 kW. Test condition: roller-type levelling of copper and aluminium busbar with curvature compensation. Result: selectable 3 kW or 5.5 kW drive covers the 160 x 12 mm and 260 x 12 mm sections. Baseline: family reference lists the same 3/5.5 kW motor options for HX160-260; versus a traditional roller leveler the source states energy use is reduced and service life is greatly extended. Canadian shops running 600 V / 60 Hz size the drive to the wider 260 mm bar.
HX160-260 — Maximum flat interface dimensions: 160 x 12 mm / 260 x 12 mm. Test condition: roller levelling of copper/aluminium busbar on the two machine sizes. Result: levels bars up to 160 mm wide by 12 mm thick on the small unit and 260 mm wide by 12 mm thick on the large unit. Baseline: family reference shows the identical 160 x 12 / 260 x 12 mm envelopes for HX160-260; the portable XT-200 shear covers lighter bar only, so this leveler handles the full 12 mm busbar thickness Canadian switchgear shops use. Pair it with a 3-in-1 or punching line for straight stock.
HX160-260 — Overall size: 1580 x 800 x 1300 mm / 1700 x 1000 x 1300 mm. Test condition: roller-type leveler footprint for the 160 mm and 260 mm models. Result: machine dimensions 1580 x 800 x 1300 mm (small) and 1700 x 1000 x 1300 mm (large). Baseline: family reference lists the same two footprints for HX160-260. The compact 1.3 m height fits under mezzanine clearance in Ontario and Quebec fabrication bays and rolls beside a busbar processor for quick levelling.
The HX160-260 uses a 3 kW or 5.5 kW motor that Canadian shops wire to 600 V / 60 Hz three-phase through the supplied control panel. Confirm the exact supply and starter rating with our team. No CSA or UL product certification is claimed on this page.
The HX160-260 levels busbar that later goes into switchgear and busway assembled to CSA C22.2 in Canada and UL in the US. Discuss your stock sizes and flatness tolerance with our team and we will confirm the roller setup.
The HX160-260 ships from the LTMC line; confirm current lead time, freight and Incoterms with our team. Consumables such as rollers and the curvature-compensation mechanism are serviced in Ontario and Quebec, and training on setup is arranged at commissioning. Wear parts are simple to source locally.
HX160-260 copper busbar leveling machine busbar bending machine
Main Features:
This machine is roller type busbar leveling machine with Fast output,efficient,simple and convenient operation,can match the busbar processing machine Convenient and quick.
This machine is adopting curvature compensation technique.compared with the traditional roller type,the phenomenon of the workpiece slippage has been improved.reasonable stress.Save energy more than doubled. At the same time greatly extended the service life of the machine.
Power Of Motor
3KW/5.5KW
The Largest Flat Interface Dimensions
160*12MM/260*12MM
Size Of copper busbar machine
1580*800*1300mm/1700*1000*1300mm
